| AS HHGPS
7000301 |
Handheld GPS
Connection Kit
Handheld GPS Connection Kit includes: NMEA connection cable, Y cable
and detailed instructions. This connection kit requires the
handheld GPS manufacturers NMEA data cable to complete the connection to
your handheld GPS. |
 |
List $23.99 |
| AS PC2
7000351 |
PC Connection Kit
The Advanced Accessory System PC Connection Kit includes: PC Serial
Port Cable with DB9 Connector, AA Battery Power Cable and detailed
instructions. The PC Connection Kit requires: PC Serial Port, 8-AA
Batteries, HumminbirdPC Software (see the Support section for details.) |
 |
List $23.99 |
| AS CR
7000371 |
SD/MMC Card Reader
This card reader plugs into a USB port on a computer and allows
your computer to read SD and MMC cards. This product does not
support SDHC cards. This will allow you to update the software on
your unit by visiting My Account in the Support section. Does not
include memory card.
|
 |
List $58.99 |
| PC 10
7200021 |
Power Cable
6 ft, waterproof. Used with all Humminbird products produced since
1989, except the 1100 Series, 997, 797 and 798. |
 |
List $13.99 |
| EC W30
7200031 |
Extension Cable
30' extension cable for transducers. |
 |
List $34.99 |
| EC W10
7200032 |
Extension Cable
10' extension cable for transducers. |
 |
List $24.99 |
| TS W
7200121 |
Transducer Switch
This switch allows you to use two transducers on one depth
sounder. The cable going to the depth finder is approximately 5 feet
long and the two cables going to the transducers are approximately
20 inches long.
|
 |
List $81.99 |
| AS EC10
7200501 |
Fishing System
Module Extension Cable
The Advanced Accessory System Extension Cable is a 10' cable that
allows the connection of an Advanced Accessory System unit to a Matrix
Fishing System unit. The Extension Cable works with GPS Receiver Kit
(Part No. AS-GR4), Handheld GPS Connection Kit (AS-HHGPS), WeatherSense™
Fishing Condition Monitor (AS-BP), PC Connection Kit (AS-PC), and Y
Cable (AS-YC). |
 |
List $29.99 |
| AS YC
7200511 |
Fishing System Y
Cable
The Advanced Accessory System Y Cable allows the connection of more
than one Advanced Accessory System unit to a Matrix Fishing System unit.
The Y Cable is included in the GPS Receiver Kit (Part No. AS-GR4) and
the Handheld GPS Connection Kit (Part No. AS-HHPGS). Both sides of this
Y cable are 12" long. |
 |
List $23.99 |
| VC 1
7200541 |
Video Cable
Video Output Cable, for the 1100 Series. Cable is approximately 6'
long with two standard male RCA connectors on the output side and one
connector that is standard to the 1100 Series and select 800 and 900
Series products for hook up. |
 |
List $19.99 |
| AS SIDB Y
7200551 |
Side Imaging
Splitter Cable
Y Cable - Side Imaging and Dual Beam - allows you to use two
transducers on one unit without the use of a transducer switch. For use
with Side Imaging products only, in conjunction with a dual beam
transducer only. For improved high speed performance for bottom
tracking. |
 |
List $23.99 |
| PC 11
7200571 |
Power Cable
Filtered power cable, 6 ft, waterproof. Used with all 1100 Series
products, 997, 797, 798. |
 |
List $13.99 |
| TG W
7300101 |
Temperature Sensor
Transom mount sensor, 20 ft. cable. Temperature range of 25-99.9
degrees F.
|
 |
List $23.99 |
| SW
7300211 |
Speed Sensor
20' cable, transom mount. Speed range of 2-75 MPH. Will not work
with any Wide Series products
|
 |
List $40.99 |
| MHX HS
7400111 |
Transducer Hardware
Transom mounting hardware includes metal mounting bracket.
|
 |
List $13.99 |
| MC W
7400361 |
Mounting System Cover
Mount cover which provides protections for the unit's connector
panel, keeping rain and dirt out of the electrical connections while
the unit is not in use (removed from the base). Made of durable
textured vinyl. Used with the MS2-Y, MS2-G, MS-B and MS-M.
|
 |
List $5.99 |
| MHX XT
7400381 |
Transducer Hardware
Mounting hardware for transom mount transducers. Includes the
plastic bracket with plastic pivot. Not compatible with
transducers that have a metal bracket. Used with: XT 6 TB 90 P and
below list.
|
 |
List $9.99 |
| MS M
7400771 |
Unit Mount
Quick disconnect mounting system. Tilts and swivels.
|
 |
List $32.99 |
| MBCC M
7400781 |
Connector Collector
This connector manages the cables that connect into the back of
your unit, holding them securely in place.
|
 |
List $6.99 |
| MHX SHS2
7400791 |
Transducer Mounting Hardware
Mounting hardware for transom mount transducers. Includes the
plastic bracket with plastic pivot. Not compatible with
transducers that have a metal bracket.
|
 |
List $9.99 |
| MKH 2
7400821 |
Mounting Knobs
For all 800 & 900 Series units. Set of two knobs.
|
 |
List $11.99 |
| IDMK 700
7400841 |
Indash Mounting Kit
For most 700 Series products. See list below. We do not
recommend using with any product that has an internal GPS
receiver. Requires an opening of 5.76"W X 4.46"H.
|
 |
List $23.99 |
| IDMK 300
7400861 |
Indash Mounting Kit
For all 300 Series products.
|
 |
List $23.99 |
| AD XTM 9
7400871 |
Transducer Mounting Hardware
|
 |
List $11.99 |
| MHX XNPT
7400901 |
Transducer Hardware
Mounting hardware and suction cup for portable XNT transducers.
|
 |
List $11.99 |
| MHX XNTF
7400911 |
Transducer Mounting Hardware
Mounting hardware for the XNTstyle transom mount transducers.
Does not kick up.
|
 |
List $9.99 |
| MHX XNT
7400931 |
Transducer Hardware
Mounting hardware for the XNT transom mount transducers.
Includes a kick up bracket
|
 |
List $9.99 |
| MHX XMK
7401031 |
Kayak Mounting Hardware
Transducer Mounting Hardware for installation in a Kayak. Kit
includes surface preparation products in addition to a transducer
cradle and adhesive products.
|
 |
List $29.99 |
| MS PM
7401061 |
Unit Mount
Swivel and tilt mount for Piranha units produced in 2009 and
later.
|
 |
List $23.99 |
